Best ERV/HRV Ventilation Installers in Ann Arbor, MI
What to look for in ERV/HRV Ventilation Installation in Ann Arbor
For fresh-air ventilation, we weight providers who choose the right device for the climate (ERV for humid markets, HRV for cold-dry) and size it to the ASHRAE 62.2 standard — over a generic 'we install fans' claim.
- Published ERV/HRV capability. A stated energy- or heat-recovery ventilator line, ideally naming ERV-vs-HRV selection for the climate.
- ASHRAE 62.2 sizing. Evidence the provider sizes ventilation to the 62.2 rate rather than guessing — the difference between clearing stale air and wasting energy.
- Google rating. A strong rating floor reflects whether the install actually fixed stuffiness/odors.
Verify before you book
- That a unit was sized to your specific home's 62.2 rate — ask for the calculation.
- Whether ERV vs HRV was the right call for your climate — confirm the moisture-transfer choice.
- Active state HVAC license — check TDLR (TX), ROC (AZ), DBPR (FL), or your local board.
See full ranking methodology for ERV/HRV Ventilation Installation →
ERV/HRV Ventilation in Ann Arbor: ERV vs HRV + 62.2 sizing
A ventilation job is judged on the right device for the climate (ERV moves moisture, HRV doesn't), recovery efficiency, and ASHRAE 62.2 rate sizing — not just bolting on a fan. Here is what each of the 3 pros below publishes: In Michigan, HVAC contractors hold a LARA Mechanical Contractor license — verify on michigan.gov/lara before scheduling.
Top picks
Indoor Comfort Heating & Cooling★ Best for Fresh-Air Ventilation
Consistently strong customer feedback (5.0★ from 585+ Google reviews).
Google 5.0★ (585+)
Consistently strong customer feedback (4.9★ from 220+ Google reviews).
Google 4.9★ (220+)
Strong customer feedback (4.5★ from 165+ Google reviews).
Google 4.5★ (165+)
Typical ERV/HRV Ventilation Installation costs in Ann Arbor, MI (2026)
Last updated
Estimated ranges for Ann Arbor, MI. Actual cost varies with home size, equipment, and scope — always request a written quote for your job.
| Service | Typical range |
|---|---|
| ERV/HRV ventilator (retrofit, installed) | $1,300–$3,050 |
| HRV ventilator (heat recovery, installed) | $1,300–$2,450 |
| ERV ventilator (energy/moisture recovery, installed) | $2,050–$3,050 |
How Indoor Air Quality Challenges Surface in Ann Arbor, Michigan Homes
Ann Arbor's humid summers and freezing winters drive seasonal swings in indoor humidity and ventilation needs, making indoor air quality a year-round concern for homeowners. Searches for the best indoor air quality HVAC companies in Ann Arbor, Michigan rise in high-humidity months. Residents often address mold, dust and stale basement air.
Quick Picks
Awards based on the same publicly available signals as the Vouched Score, including provider-stated certifications and dealer status. Not independently verified.
How do Ann Arbor homeowners verify a licensed 'Indoor Air Quality' HVAC contractor quickly?
- Do I need an ERV or an HRV?
- Both recover most of the energy from the stale air they exhaust while bringing in filtered fresh air. The difference is moisture: an ERV transfers humidity as well as heat (the right choice in humid Texas and Florida), while an HRV moves heat only (better for cold, dry winters). A tight, stuffy, or newly-sealed home is the main candidate.
- How is the right ventilation size determined?
- Sizing follows the ASHRAE 62.2 residential ventilation standard, which sets the fresh-air rate from the home's floor area and bedroom count. A good installer calculates that rate rather than guessing — an undersized unit won't clear stale air and an oversized one wastes energy.
- How can I verify an installer for ERV/HRV ventilation in Ann Arbor?
- Ask for experience specifically installing ERV or HRV systems and for recent job references in Ann Arbor. Request manufacturer-authorized dealer or installer credentials when available. Confirm the technician plans to size the unit to the home and describe ventilation rates for Michigan's humid summers and cold winters.
- What should I check when hiring someone to install in-duct UV-C lights?
- Confirm the installer has UV-C experience and follows manufacturer safety protocols. Ask about lamp placement relative to coils and media filters, and whether the installer uses shielded fixtures to protect occupants. Request a written scope that lists lamp life, recommended replacement interval, and any advertised microbial-reduction claims.
- What signs indicate a contractor is suitable for a whole-house media filter upgrade?
- Choose contractors who evaluate existing filter cabinet dimensions and airflow impacts. Ask whether they will measure static pressure before and after upgrade and list compatible media MERV ratings. A thorough installer will provide options that balance improved filtration with safe HVAC airflow in heated and cooled modes.
- How do I get a quote from these indoor air quality companies?
- Submit one request on this page and we send it to the vetted indoor air quality pros in Ann Arbor, MI listed here. They send quotes back — no obligation.