Best ERV/HRV Ventilation Installers in Richmond, VA
What to look for in ERV/HRV Ventilation Installation in Richmond
For fresh-air ventilation, we weight providers who choose the right device for the climate (ERV for humid markets, HRV for cold-dry) and size it to the ASHRAE 62.2 standard — over a generic 'we install fans' claim.
- Published ERV/HRV capability. A stated energy- or heat-recovery ventilator line, ideally naming ERV-vs-HRV selection for the climate.
- ASHRAE 62.2 sizing. Evidence the provider sizes ventilation to the 62.2 rate rather than guessing — the difference between clearing stale air and wasting energy.
- Google rating. A strong rating floor reflects whether the install actually fixed stuffiness/odors.
Verify before you book
- That a unit was sized to your specific home's 62.2 rate — ask for the calculation.
- Whether ERV vs HRV was the right call for your climate — confirm the moisture-transfer choice.
- Active state HVAC license — check TDLR (TX), ROC (AZ), DBPR (FL), or your local board.
See full ranking methodology for ERV/HRV Ventilation Installation →
ERV/HRV Ventilation in Richmond: ERV vs HRV + 62.2 sizing
A ventilation job is judged on the right device for the climate (ERV moves moisture, HRV doesn't), recovery efficiency, and ASHRAE 62.2 rate sizing — not just bolting on a fan. Here is what each of the 5 pros below publishes: In Virginia, HVAC contractors hold a DPOR HVA license — verify on dpor.virginia.gov before paying.
Top picks
Consistently strong customer feedback (4.8★ from 9,825+ Google reviews).
Google 4.8★ (9,825+)
Consistently strong customer feedback (4.8★ from 5,640+ Google reviews).
Google 4.8★ (5,640+)
Consistently strong customer feedback (4.9★ from 825+ Google reviews).
Google 4.9★ (825+)
Consistently strong customer feedback (4.9★ from 1,530+ Google reviews).
Google 4.9★ (1,530+)
Consistently strong customer feedback (4.8★ from 330+ Google reviews).
Google 4.8★ (330+)
Typical ERV/HRV Ventilation Installation costs in Richmond, VA (2026)
Last updated
Estimated ranges for Richmond, VA. Actual cost varies with home size, equipment, and scope — always request a written quote for your job.
| Service | Typical range |
|---|---|
| ERV/HRV ventilator (retrofit, installed) | $1,150–$2,650 |
| HRV ventilator (heat recovery, installed) | $1,150–$2,150 |
| ERV ventilator (energy/moisture recovery, installed) | $1,750–$2,650 |
Why Richmond VA homeowners need to mind Indoor Air Quality after humid summers
Richmond's long, humid summers raise indoor humidity and mold risk, stressing ventilation and filtration systems. Homeowners looking for the best indoor air quality HVAC companies in Richmond, VA should focus on humidity control and certified testing. This matters for Richmond homeowners choosing the best indoor air quality HVAC contractors for older rowhouses and newer energy-efficient homes.
How quickly can a Richmond VA "Indoor Air Quality" pro typically respond, and what should homeowners ask first?
- Do I need an ERV or an HRV?
- Both recover most of the energy from the stale air they exhaust while bringing in filtered fresh air. The difference is moisture: an ERV transfers humidity as well as heat (the right choice in humid Texas and Florida), while an HRV moves heat only (better for cold, dry winters). A tight, stuffy, or newly-sealed home is the main candidate.
- How is the right ventilation size determined?
- Sizing follows the ASHRAE 62.2 residential ventilation standard, which sets the fresh-air rate from the home's floor area and bedroom count. A good installer calculates that rate rather than guessing — an undersized unit won't clear stale air and an oversized one wastes energy.
- Do Richmond homes commonly need ERV or HRV ventilation retrofits under current code or for humidity control?
- Some Richmond homes, especially airtight or recently weatherized houses, benefit from ERV/HRV to meet ventilation and indoor humidity goals. The 2021 USBC encourages adequate mechanical ventilation. Ask whether the contractor performs ventilation rate calculations and heat-recovery sizing, and request an explanation of expected energy trade-offs and maintenance needs.
- What factors most affect IAQ pricing in Richmond?
- Local pricing depends on project scope, required diagnostics, and building access. Older homes, complex ductwork, and required ventilation balancing increase scope. Permit complexity tied to the 2021 USBC and peak-season demand can extend schedules. Ask contractors what diagnostics they include, whether a written scope references code changes, and whether the quote separates parts, labor, and permit fees.
- What questions should homeowners ask about whole-house filter upgrades and MERV ratings in Richmond's humid climate?
- Ask which MERV rating is recommended for the existing blower and whether the upgrade requires blower or static-pressure adjustments. Higher-MERV filters capture finer particles but can restrict airflow if the system isn't sized properly. Request a contractor to measure post-upgrade static pressure, and ask about recommended filter change intervals given Richmond's pollen and humidity patterns.
- How do I get a quote from these indoor air quality companies?
- Submit one request on this page and we send it to the vetted indoor air quality pros in Richmond, VA listed here. They send quotes back — no obligation.