Best ERV/HRV Ventilation Installers in Vancouver, WA
What to look for in ERV/HRV Ventilation Installation in Vancouver
For fresh-air ventilation, we weight providers who choose the right device for the climate (ERV for humid markets, HRV for cold-dry) and size it to the ASHRAE 62.2 standard — over a generic 'we install fans' claim.
- Published ERV/HRV capability. A stated energy- or heat-recovery ventilator line, ideally naming ERV-vs-HRV selection for the climate.
- ASHRAE 62.2 sizing. Evidence the provider sizes ventilation to the 62.2 rate rather than guessing — the difference between clearing stale air and wasting energy.
- Google rating. A strong rating floor reflects whether the install actually fixed stuffiness/odors.
Verify before you book
- That a unit was sized to your specific home's 62.2 rate — ask for the calculation.
- Whether ERV vs HRV was the right call for your climate — confirm the moisture-transfer choice.
- Active state HVAC license — check TDLR (TX), ROC (AZ), DBPR (FL), or your local board.
See full ranking methodology for ERV/HRV Ventilation Installation →
ERV/HRV Ventilation in Vancouver: ERV vs HRV + 62.2 sizing
A ventilation job is judged on the right device for the climate (ERV moves moisture, HRV doesn't), recovery efficiency, and ASHRAE 62.2 rate sizing — not just bolting on a fan. Here is what each of the 7 pros below publishes: In Washington, HVAC contractors hold an L&I HVAC/R Specialty Contractor license — verify on lni.wa.gov before scheduling.
Top picks
Consistently strong customer feedback (4.9★ from 1,295+ Google reviews).
Google 4.9★ (1,295+)
Consistently strong customer feedback (4.9★ from 965+ Google reviews).
Google 4.9★ (965+)
Consistently strong customer feedback (5.0★ from 400+ Google reviews).
Google 5.0★ (400+)
Consistently strong customer feedback (4.8★ from 785+ Google reviews).
Google 4.8★ (785+)
Strong customer feedback (4.6★ from 975+ Google reviews).
Google 4.6★ (975+)
Consistently strong customer feedback (4.9★ from 370+ Google reviews).
Google 4.9★ (370+)
Consistently strong customer feedback (4.8★ from 395+ Google reviews).
Google 4.8★ (395+)
Typical ERV/HRV Ventilation Installation costs in Vancouver, WA (2026)
Last updated
Estimated ranges for Vancouver, WA. Actual cost varies with home size, equipment, and scope — always request a written quote for your job.
| Service | Typical range |
|---|---|
| ERV/HRV ventilator (retrofit, installed) | $1,350–$3,100 |
| HRV ventilator (heat recovery, installed) | $1,350–$2,500 |
| ERV ventilator (energy/moisture recovery, installed) | $2,050–$3,100 |
Why Vancouver, Washington's damp winters change how you protect "Indoor Air Quality" systems
Vancouver's long, damp winters raise indoor humidity and mold risk. Selecting one of the best indoor air quality HVAC companies in Vancouver, WA determines needed filters, dehumidifiers, and ventilation upgrades. Seasonal service demand spikes in winter; look for providers offering emergency service, clear pricing, and advertised warranties.
Quick answers Vancouver homeowners need about hiring "Indoor Air Quality" pros
- Do I need an ERV or an HRV?
- Both recover most of the energy from the stale air they exhaust while bringing in filtered fresh air. The difference is moisture: an ERV transfers humidity as well as heat (the right choice in humid Texas and Florida), while an HRV moves heat only (better for cold, dry winters). A tight, stuffy, or newly-sealed home is the main candidate.
- How is the right ventilation size determined?
- Sizing follows the ASHRAE 62.2 residential ventilation standard, which sets the fresh-air rate from the home's floor area and bedroom count. A good installer calculates that rate rather than guessing — an undersized unit won't clear stale air and an oversized one wastes energy.
- How should homeowners prepare HVAC and ventilation before Vancouver's long, damp winter?
- Schedule an inspection and dehumidifier assessment well before the wet season begins. Ask technicians to check whole-house dehumidifier sizing, drainage, and condensation controls. Confirm ductwork condition and ventilation balance to prevent cold-season condensation. A pre-winter tune-up reduces mold risk and helps technicians recommend mechanical ventilation, such as ERV or HRV, when tighter homes need controlled fresh air.
- When is mechanical ventilation (ERV/HRV) recommended for Vancouver homes?
- Mechanical ventilation is recommended when homes have tight building envelopes or persistent indoor humidity and pollutant buildup. An ERV or HRV brings controlled fresh air while recovering heat and reducing moisture transfer. Request a ventilation assessment that measures ventilation rates and indoor humidity. Neighborhoods with newer tight builds often benefit most from a planned ERV/HRV installation.
- How can homes in Downtown Vancouver or Hazel Dell protect indoor air during wildfire smoke?
- Seal obvious gaps and run high-efficiency whole-house filtration or portable HEPA units when smoke is present. Look for providers who recommend high-MERV filters compatible with the HVAC system and who can install pressure-monitored filtration to avoid blower strain. During heavy smoke, ask about temporary portable air cleaners and emergency service availability to replace clogged filters quickly.
- How do I get a quote from these indoor air quality companies?
- Submit one request on this page and we send it to the vetted indoor air quality pros in Vancouver, WA listed here. They send quotes back — no obligation.