6 Best Furnace Replacement Companies in Murray, UT (2026)
Murray's cold winter temperatures and older brick and bungalow-era homes raise heating bills and increase furnace failure risk, making timely replacement important. Searching for the best furnace replacement companies in murray ut helps homeowners secure licensed installers, advertised warranties, and proper permits before swapping aging systems.
Quick Picks
Awards based on the same publicly available signals as the Vouched Score, including provider-stated certifications and dealer status. Not independently verified.
Which Murray, Utah "furnace replacement" pros lead on review volume and warranty promises
| # | Provider | Score | Years | Best for | |
|---|---|---|---|---|---|
| 1 | SScott Hale Plumbing, Drains, Heating & Air | 83 | 4.7 (7,110+) | 42+ | ★ Highest Vouched ScoreHigh-Efficiency (95%+ AFUE) UpgradesGas Furnace Replacement |
Editorial: Scott Hale lists furnace replacement with same-day and emergency options. NATE-certified technicians are noted for gas furnace installs. Scott Hale notes flexible financing for high-ticket heating replacements. Founded 1984, Scott Hale reports 40+ years serving Salt Lake County. Murray winters demand properly vented, combustion-safe gas furnace installations and timely response. Strengths:
When to choose them
| |||||
| 2 | BBig Brothers Home Services | 79 | 4.9 (845+) | 4+ | NATE-Certified Installer |
Editorial: Big Brothers Home Services advertises gas furnace replacement and changeouts. NATE-certified technicians are listed on the website. Murray's cold winters make timely furnace work important, and same-day response is advertised. The site states financing through Service Finance Company and free estimates for larger replacements. Strengths:
Reviewers praise:
When to choose them
| |||||
| 3 | HHome Performance Pros | 78 | 5.0 (260+) | ||
Editorial: Home Performance Pros advertises right-sized, high-efficiency furnace replacements. Home Performance Pros lists flat-rate pricing and free estimates for replacements. Home Performance Pros is Murray-based, serving the Wasatch Front's cold winters. Home Performance Pros advertises same-day emergency response and a workmanship guarantee on installs. Strengths:
Reviewers praise:
When to choose them
| |||||
| 4 | AAir Design Heating & Cooling | 76 | 4.8 (490+) | 31+ | |
Editorial: Air Design Heating & Cooling focuses on furnace replacement across the Wasatch Front. Family-owned since 1995, the company lists 30+ years of local experience. Murray's cold winters increase demand for properly vented, combustion-safe furnaces. The website advertises same-day emergency response for no-heat calls. Air Design says technicians are certified, licensed, and insured. Strengths:
When to choose them
| |||||
| 5 | EEfficient Systems Heating & Cooling HVAC | 72 | 5.0 (130+) | Furnace + AC Changeout | |
Editorial: furnace replacement specialist with routine full-system changeouts and matched installs, per their site. Efficient Systems states same-day emergency response is available for urgent heating failures. The company advertises financing options starting near $90/month with approved credit. Efficient Systems lists 8+ years serving the Salt Lake Valley. Review excerpts note clear, educational explanations during inspections. Strengths:
Reviewers praise:
When to choose them
| |||||
| 6 | AA-1 Heating & Cooling | 71 | 5.0 (95+) | Commercial Furnace Replacement | |
Editorial: A-1 Heating & Cooling lists residential and commercial furnace replacement services. The company states emergency response is available twenty-four hours. A-1 Heating & Cooling notes they avoid recommending replacements until units are unsafe. The business advertises free estimates and several tune-up tiers. Local winters in Murray strain furnaces, so quick emergency response is relevant here. Strengths:
Reviewers praise:
When to choose them
| |||||
Typical Furnace Replacement costs in Murray, UT (2026)
Last updated
Estimated ranges for Murray, UT. Actual cost varies with home size, equipment, and scope — always request a written quote for your job.
| Service | Typical range |
|---|---|
| Full gas furnace replacement (80% AFUE, installed) | $2,700–$5,850 |
| High-efficiency condensing furnace (95%+ AFUE, installed) | $4,050–$8,550 |
| Modulating / two-stage variable-speed (ECM) furnace upcharge | $540–$1,800 |
| Condensing-furnace venting + condensate conversion (80%->95% AFUE) | $540–$1,600 |
| Gas line / electrical / permit modification (changeout) | $135–$810 |
| Electric furnace / air-handler replacement (installed) | $1,800–$4,500 |
Nearby Utah furnace replacement pricing: Draper · Layton · Lehi
See broader context: Furnace Replacement pricing in Utah · Furnace Replacement pricing nationwide
What evaluation factors reveal quality for Murray "furnace replacement" contractors?
This guide evaluated 6 Murray furnace replacement providers on review volume, advertised emergency response, certifications, pricing model, and service specializations. Primary signals were Google review counts and provider-stated features such as NATE certification, same-day or 24/7 emergency response, and flat-rate or financing options.
- Scott Hale Plumbing, Drains, Heating & Air reports NATE certification and states they offer 24/7 emergency service; Google Maps shows 4.7/5.0 across 7,110+ reviews.
- Big Brothers Home Services lists NATE certification and advertises same-day response; their Google rating is 4.9/5.0 (845+ reviews) per Google reviews.
- Home Performance Pros notes flat-rate pricing and high-efficiency focus; they advertise same-day emergency response and a 5.0/5.0 Google rating (260+ reviews).
- Air Design Heating & Cooling states financing and free estimates, and reports 30+ years in business; Google Maps lists a 4.8/5.0 rating (490+ reviews).
- Efficient Systems Heating & Cooling HVAC lists family-owned status, financing, and honest assessments; they report an 8+ year history and a 5.0/5.0 Google rating (130+ reviews).
Compare these objective signals — reviews, certified credentials, advertised response windows, and pricing models — when shortlisting contractors.
How do I choose a Furnace Replacement Company in Murray, UT?
- Verify licensing and complaints with the state licensing board.
- Compare Google review counts and average ratings across providers.
- Confirm emergency response timelines and advertised warranty terms.
- Request written estimates showing pricing model and equipment efficiency.
- Check for technician certifications such as NATE and manufacturer dealer status.
Data sources referenced: Google Maps / Google reviews and BBB records.
5 furnace replacement issues Murray homeowners frequently face and how they show up locally
The most common furnace replacement problems in Murray stem from long, cold winters and many older homes. Extended winter runtimes, freeze-thaw stress on vents and seals, and component wear in ageing brick and bungalow-era houses all accelerate failures and often push homeowners toward full replacement sooner than expected.
- Extended run-time wear. Murray's prolonged cold spells force furnaces to run longer each winter, which accelerates motor, bearing, and heat-exchanger wear and leads to earlier failures.
- Freeze‑thaw stress on vents and seals. Repeated freeze and thaw cycles in Murray cause metal vents and exterior furnace seals to crack and leak, reducing efficiency and creating safety risks.
- Frequent cycling and control failures. Rapid temperature swings during Murray cold snaps make thermostats and control boards cycle often, wearing relays and sensors and causing intermittent heating loss.
- Corrosion in older installations. Furnaces in Murray's older brick and bungalow-era homes often show accelerated corrosion where condensed combustion gases meet cold ductwork, shortening equipment life.
- Undersized systems after retrofits. Homes in Murray that have been renovated may have higher heat loss; existing furnaces then run continuously and fail prematurely, revealing the need for properly sized replacements.
How Murray's population, seasonality and licensing landscape shapes furnace replacement choices
Murray's long, cold winters and many older brick and bungalow-era homes increase furnace runtime and replacement needs. High winter demand and strict local licensing requirements drive homeowners to seek licensed, certified technicians who can size replacements correctly and meet permit and bonding rules.
Murray's dominant local condition is prolonged cold winter weather. Longer runtimes increase wear on motors, heat exchangers, and controls.
Many older Murray homes were built before modern insulation standards. Poor shell performance raises required furnace capacity and stresses undersized systems.
Evaluated providers show capabilities that match these stresses. Several offer emergency service, which helps when furnaces fail mid-winter.
NATE certification appears in some listings. Look for NATE-certified technicians for correct combustion tuning and safer heat-exchanger assessments.
One evaluated provider advertises flat-rate pricing and furnace-type expertise. Flat-rate bids simplify comparisons for homeowners facing replacement during peak season.
Local licensing and bonding are required for Murray permits. Choose contractors who list licensing and insurance to streamline permit approval and inspections.
To compare evaluated providers or request pricing, request a free quote at #contact.
How do Murray homeowners pick a reliable "furnace replacement" contractor without overpaying?
- How do I get a quote from these furnace replacement companies?
- Submit one request on this page and we send it to the vetted furnace replacement pros in Murray, UT listed here. They send quotes back — no obligation.
- Typical furnace replacement pricing in Murray, UT: what should I budget?
- Full gas furnace replacement typically runs $2,700–$5,850, and high-efficiency condensing furnace runs $4,050–$8,550 in Murray, Utah. See the Furnace Replacement pricing table on this page for the full per-service breakdown.
- Do Murray furnace replacement contractors need a city business license and bond?
- Yes. Contractors performing furnace replacements in Murray must hold a business license and maintain the bonding the city requires. Confirm the contractor shows a current Murray business license and bond number before signing a contract. Ask the company to provide permit confirmation to speed inspections and avoid delays.
- Is insurance and workers' compensation required for furnace replacement work in Murray?
- Yes. Murray requires contractors to carry liability insurance and workers' compensation for on-site crews. Request proof of both before allowing technicians into the home. Verifying coverage protects homeowners from liability and ensures injured workers receive benefits if an accident occurs.
- When is Murray's furnace replacement season busiest, and how does that affect availability?
- Furnace replacement demand rises sharply during Murray's cold-season months. Bookings often back up as temperatures drop, so plan replacements outside peak cold snaps when possible. If a mid-winter emergency occurs, ask providers about weekend or emergency service availability and lead times for equipment delivery.
- How do I find a contractor who specializes in high-efficiency furnace replacements in Murray?
- Look for contractors that list high-efficiency installations and manufacturer dealer relationships. Confirm technicians provide a manual J load calculation and present efficiency metrics for proposed models. Reviews mentioning repeated high-efficiency installs and written efficiency guarantees are useful vetting signals.
- Do installers need specific gas-certification for gas furnace replacement in Murray?
- Installers should hold relevant gas-handling credentials and follow local code for combustion safety. Ask the contractor to show gas-service certifications and explain the combustion testing process they will use. Proper certification and testing reduce carbon-monoxide risks after installation.
- Should furnace and central AC be replaced together in Murray homes, and when does that make sense?
- Replacing both systems together can improve matched-system efficiency and simplify warranties. Choose combined replacement when the HVAC split’s age or inefficiency limits performance. Have the contractor inspect ductwork and controls to confirm whether a combined upgrade provides measurable efficiency or comfort gains.
- Can Murray contractors offer same-day furnace replacement during an emergency?
- Some contractors advertise same-day replacement options, but availability depends on parts, crew schedules, and permit processing. Ask providers whether they offer emergency service (advertised) and what is required to confirm same-day work, including model availability and on-site diagnostics.
- What should commercial property owners in Murray look for when hiring a commercial furnace replacement contractor?
- Look for commercial HVAC experience, project references, and proof of bonding and insurance suitable for larger jobs. Confirm the contractor handles commercial permits, load calculations for multiple zones, and can coordinate with building inspectors. Written project timelines and escalation contacts are important for minimizing downtime.