Best Furnace Repair Companies in Arlington, TX
Furnace Repair in Arlington: NATE certification + gas safety
Furnace repair is gas + combustion work — credentials carry more weight than for AC. NATE certification and EPA 608 are the baseline. Here is what each of the 14 providers below publishes: In Texas, HVAC contractors must hold an active TDLR TACLA license — ask for the number and verify on tdlr.texas.gov before paying.
Top picks
Hightower Service, Inc.★ Best NATE-Certified Team
Furnace Repair score: 5.0
Vouched Score: 93/100
Driven by: NATE Certified
- NATE: ✓
- Mfg dealer: Carrier Factory Authorized Dealer
- Free estimates: ✓
- Years: 70+
Google 4.9★ (415+)BBB A+
- Emergency: same-day
- Mfg dealer: American Standard Authorized Dealer
- Warranty: 10-Year
- Flat-rate: ✓
- Free estimates: ✓
- Years: 20+
Google 5.0★ (145+)BBB A+
- Flat-rate: ✓
- Free estimates: ✓
- Years: 20+
Google 5.0★ (65+)
- Emergency: 30-45 minutes
- Mfg dealer: Lennox Authorized Dealer
- Warranty: Lifetime
- Flat-rate: ✓
- Free estimates: ✓
- Years: 80+
Google 4.8★ (2,135+)
Minuteman Heating & AC Repair
Furnace Repair score: 3.8
Vouched Score: 88/100
Driven by: same-day Emergency
- Emergency: same-day
- Flat-rate: ✓
- Free estimates: ✓
- Years: 10+
Google 4.8★ (1,145+)
- Emergency: same-day
- Flat-rate: ✓
- Free estimates: ✓
- Maintenance: ✓
- Years: 30+
Google 4.9★ (110+)BBB 5.0★ (5)
- Emergency: 7 days a week
- Warranty: 10-Year
- Flat-rate: ✓
- Free estimates: ✓
- Years: 30+
Google 4.8★ (325+)BBB A+
- Flat-rate: ✓
- Free estimates: ✓
- Years: 55+
What customers say about furnace repair
My heat went out during a frigid weather event. Paschal was able to get a technician to my house very quickly (within a couple hours)! The tech, Brayden, was awesome. He was personable, knowledgeable, and excellent at explaining the issues with my heater. He was able to make the necessary repairs on site. It was the best possible outcome for my situation. I would highly recommend Paschal. THANK YOU BRAYDEN
Google 4.8★ (2,680+)BBB B-
- Free estimates: ✓
- Years: 45+
Google 4.9★ (175+)
- Emergency: 24/7
- Flat-rate: ✓
- Free estimates: ✓
- Years: 8+
Google 4.9★ (380+)BBB 4.0★ (4)
- Flat-rate: ✓
- Free estimates: ✓
- Years: 5+
What customers say about furnace repair
Atlas AC Repair installed a Carrier variable speed AC and gas furnace system in our house. The installation went great, with quality workmanship on each part of the installation. After it was complete our lead technician took the time to do a thorough check out of the system to make sure all performance was within specs. It has worked amazingly well (and quiet) for both cooling and heating so far.
Google 4.8★ (160+)BBB 4.91★ (55+)
- Mfg dealer: Trane Authorized Dealer
- Years: 15+
Google 4.9★ (100+)BBB A+
- Emergency: same-day
- Warranty: 1-Year
- Flat-rate: ✓
- Free estimates: ✓
- Maintenance: ✓
- Years: 20+
Google 4.8★ (530+)
- Free estimates: ✓
- Years: 3+
Google 5.0★ (100+)BBB A+
Typical Furnace Repair costs in Arlington, TX (2026)
Last updated
Estimated ranges for Arlington, TX. Actual cost varies with home size, equipment, and scope — always request a written quote for your job.
| Service | Typical range |
|---|---|
| Furnace repair | $135–$775 |
| Ignitor or flame sensor replacement | $180–$455 |
| Heat exchanger inspection (CO safety check) | $135–$320 |
| Heat exchanger replacement (repair-vs-replace inflection) | $1,350–$3,200 |
What Arlington Residents Frequently Ask About HVAC Repairs
- When is a furnace problem an actual emergency vs. a next-day call?
- Carbon-monoxide alarm, smell of gas, or visible cracks in the heat exchanger → emergency. No-heat in sub-freezing weather is urgent but rarely safety-critical. Most no-heat calls are igniter, flame sensor, or gas valve — same-day fixable.
- What's the difference between a flame-sensor clean ($120) and heat-exchanger replacement ($1,500+)?
- Flame sensors clog with combustion residue and stop signaling the gas valve — quick clean or swap. Cracked heat exchangers leak CO into your home airflow and require exchanger replacement (often impractical) or full furnace replacement. The tech's CO meter reading decides which one you're facing.
- Do Arlington HVAC contractors need a state-issued license to perform repairs?
- Yes, all HVAC contractors operating in Arlington must hold a valid license issued by the Texas Department of Licensing and Regulation (TDLR). This state-mandated requirement ensures that technicians possess the necessary training to handle refrigerants and electrical components safely. When you search for the best HVAC companies in Arlington, TX, always verify their current TDLR status to ensure they meet mandatory safety and technical standards.
- How do I find a specialist for high-efficiency cooling systems in Arlington?
- Look for providers who explicitly mention NATE certification and manufacturer-specific training for variable-speed or smart-thermostat systems. These credentials signal that a technician has advanced knowledge of the complex equipment needed to combat extreme Arlington heat. Many top-rated firms in neighborhoods like SW Arlington or Dalworthington Gardens maintain these certifications to ensure their installations perform reliably under high electrical loads.
- When is the busiest season for HVAC companies in Arlington?
- The peak demand for HVAC services in Arlington typically coincides with the onset of extreme summer temperatures. During these periods, systems run at maximum capacity, often leading to a surge in repair requests. To avoid long wait times, many homeowners in Pantego and surrounding areas schedule their annual maintenance checks well before the first heat waves arrive in late spring.
- How much does HVAC service cost in Arlington, TX?
- Furnace repair typically runs $135–$775, and heat exchanger replacement runs $1,350–$3,200 in Arlington, Texas. See the HVAC pricing table on this page for the full per-service breakdown.