Best AC Replacement Companies in Irving, TX
AC Replacement in Irving: manufacturer authorization + warranty
On a $7–12K install, two facts predict ten-year outcomes: which manufacturer the contractor is authorized to install at full warranty terms, and how long they back their own labor. Here is what each of the 7 installers below publishes: In Texas, HVAC contractors must hold an active TDLR TACLA license — ask for the number and verify on tdlr.texas.gov before paying.
Top picks
- Warranty: 1-Year
- Financing: ✓
- Free estimates: ✓
- Years: 40+
Google 4.7★ (4,380+)BBB 1.73★ (10+)
- Financing: ✓
- Free estimates: ✓
- Years: 20+
Google 4.9★ (1,340+)
- Financing: ✓
- Free estimates: ✓
- Years: 15+
What customers say about ac replacement
Go2Guys came to my mother’s home and installed a new HVAC system. The installers were very professional and knowledgeable. The system was installed the same day they came out. The company is very great on their customer service replying constantly and keeping in touch with you after the installation. Go2Guys financed and installed the system. I highly recommend anyone needing service or new installation. They also have done service on my home to my A/C unit and have had no issues. Overall great company if anyone needs fast service or new installation.
Google 5.0★ (70+)
- Financing: ✓
- Free estimates: ✓
- Years: 5+
Google 4.9★ (100+)
- Financing: ✓
- Free estimates: ✓
- Years: 60+
Google 4.7★ (1,885+)BBB 3.0★ (2)
- Dealer tier: Amana and Rheem Authorized Dealer
- Free estimates: ✓
- Years: 30+
What customers say about ac replacement
We had issues with our freshly out of warranty dish washer, American Air & Joe were fantastic every step of the way. We ended up replacing the unit but can't speak highly enough of Joe and the team - they were flexible, incredibly transparent in their price and process. If you need HVAC or appliance repairs in North Texas they're your first call!
Google 4.9★ (235+)BBB A+
- Dealer tier: Mitsubishi Diamond Elite Contractor
- Warranty: 12-Year
- Financing: ✓
- Free estimates: ✓
- Years: 20+
What customers say about ac replacement
Installation of a new AC/Hear Mitsubishi MiniSplit was excellent. They routed lines in my wall and through dead space above garage to minimize visibility on outside of the house. Looks and works perfect. Would highly recommend
Google 4.9★ (60+)BBB A+
Typical AC Replacement costs in Irving, TX (2026)
Last updated
Estimated ranges for Irving, TX. Actual cost varies with home size, equipment, and scope — always request a written quote for your job.
| Service | Typical range |
|---|---|
| Full AC system replacement (3-ton, installed) | $4,550–$11,400 |
| R-454B equipment upcharge (vs equivalent R-410A tier) | $365–$1,100 |
| SEER2 17+ high-efficiency upcharge (utility rebate tier) | $730–$2,300 |
| Ductwork modification (resize / re-balance per Manual D) | $545–$2,000 |
2026 note on equipment: All new residential AC equipment manufactured after Jan 2025 uses R-454B refrigerant — if a contractor is still quoting R-410A new installs in 2026, ask why (likely old inventory). Federal Section 25C tax credit expired Dec 31, 2025, so state and utility rebates are the surviving incentives; SEER2 17+ models typically unlock $500–$1,200 in utility rebates (Oncor, CPS, SRP, etc.) — confirm directly with your utility before pricing the install.
Why Irving's Variable Climate Demands Specialized HVAC Maintenance
Irving's extreme summer heat and fluctuating winter temperatures place significant strain on residential cooling and heating units. Homeowners in neighborhoods like Las Colinas and Valley Ranch require consistent performance from their climate control systems, making it essential to identify the best HVAC companies in Irving. Reliable care ensures long-term comfort and efficiency for hvac services irving Texas residents expect from a trusted hvac near irving.
R-454B refrigerant in 2026: what Irving AC replacement buyers need to know
All new residential AC and heat-pump equipment manufactured after Jan 1, 2025 uses R-454B refrigerant — the EPA AIM Act phase-down replaces R-410A (global warming potential 2,088) with R-454B (GWP 466). If a contractor in Irving quotes R-410A new equipment in 2026, ask why: it's almost certainly discontinued inventory, and you'd be locked into a refrigerant scheduled for full phaseout by 2032.
R-454B is not drop-in compatible with R-410A — different operating pressures, different POE lubricants, different leak-test procedure. Equipment-side cost runs about $400–$1,200 over the equivalent R-410A tier (see the pricing table above). The bigger consideration is contractor capability: R-454B is mildly flammable (A2L classification), so leak detection, brazing, and recovery practices changed in 2025 — your installer needs A2L-specific training, not just EPA 608 Universal.
Before signing an R-454B install quote, ask each contractor:
- Is your technician certified on A2L refrigerants by the manufacturer? Carrier, Trane, Lennox, Rheem, and York all run dealer A2L courses — generic EPA 608 isn't enough for safe 2026 install practice.
- What leak detector are you using on this install? Older R-410A-only detectors miss R-454B leaks. You want an A2L-rated infrared or heated-diode unit.
- How will warranty refrigerant be sourced if there is a mid-cycle supply disruption? R-454B is the long-term residential standard, but ask how the dealer would source it 2027–2028 if a supply shock hits — a documented supplier chain beats a verbal assurance.
What Every Irving Resident Needs to Know Before Booking HVAC Service
- What's the federal minimum SEER2 rating for a new AC in 2026?
- 14.3 SEER2 in southern states (FL, TX, AZ, CA, GA, NV, NM), 13.4 SEER2 in northern states. Anything sold new in 2026 meets at least that floor; the choice is whether to pay for 15.2+ to qualify for utility-rebate tiers and lower bills.
- The federal Section 25C tax credit expired — what incentives are left?
- 25C and 25D expired December 31, 2025. The surviving residential incentives are state and utility rebates (Oncor, SRP, APS, CenterPoint, Mass Save, etc.) plus state HEEHRA programs where active. Confirm any rebate the installer cites is a current state or utility program, not the lapsed federal credit.
- What should I look for when choosing an HVAC specialist for a mini-split installation in Irving?
- When searching for a mini-split specialist in Irving, look for providers who hold specific manufacturer-dealer designations and demonstrate experience with high-efficiency, ductless systems. Because these units require precise refrigerant handling and electrical configuration, prioritize contractors who highlight A2L refrigerant certifications in their credentials. Reviewing past customer feedback for specific mentions of mini-split performance in local neighborhoods like Las Colinas can also help identify companies with a proven track record for these installations.
- Do I need a city-issued permit for major HVAC system replacements in Irving?
- Major HVAC system replacements in Irving generally require a mechanical permit to ensure the installation complies with local building codes and safety regulations. While licensed contractors typically handle the permit application process as part of their service, homeowners should confirm this is included in their project estimate. Ensuring proper permitting protects your property value and maintains the validity of your manufacturer's equipment warranty.
- What factors influence the cost of HVAC services in Irving?
- Pricing for HVAC services in Irving is primarily influenced by the complexity of the repair, the age of the existing housing stock, and the specific equipment requirements for your home. Older homes in established districts may require more extensive ductwork modifications or electrical upgrades compared to newer, high-efficiency builds. Additionally, the timing of your service request relative to seasonal demand cycles can impact availability and pricing, as emergency calls during extreme weather events often involve higher operational costs for providers.
- What does HVAC service typically run in Irving, TX?
- Full AC system replacement typically runs $4,550–$11,400 in Irving, Texas. See the HVAC pricing table on this page for the full per-service breakdown.