Vetted heat pump installation providers across 3 Florida cities. Each provider is scored on a 0–100 Vouched Score blending public-record signals, customer reviews, and editorial assessment. See methodology →
Local cost drivers — climate, code, utility rebates, and refrigerant rules — that shape heat pump installation pricing in Florida.
A heat pump is regulated refrigeration work in Florida, so the installer must be a state-certified or registered HVAC contractor through the CILB (Class A unrestricted, Class B for ≤25-ton residential) plus EPA Section 608 certification to braze and charge the line set, with a mechanical permit pulled locally — there is no separate “heat pump” license. Verify the license at myfloridalicense.com.
The Florida heat-pump rebate that actually moves the number is the strip-heat conversion: Duke Energy Florida's Home Energy Improvement program pays $600 to replace electric-resistance strip heat with a heat pump at 15.2 SEER2 / 7.5 HSPF2, rising to $1,000 at 16 SEER2, but only after a free Home Energy Check. FPL applies a $200 instant rebate through a Participating Independent Contractor on 15.2 SEER2+ systems — heat pumps included, unlike its mini-split exclusion — and TECO tiers $40–$550 by SEER2. With the federal 25C heat-pump credit gone after December 31, 2025, these utility rebates are the only 2026 offset.
Florida's near year-round cooling and minimal heating load mean a straight air-source heat pump with a small electric-resistance backup strip covers the whole house — no gas furnace or dual-fuel setup like cold-climate installs need — and the heating that does happen runs far cheaper on the heat pump than on the strip heat many older Florida homes still run. In coastal salt-air zones, spec a corrosion-protected (blue-fin/coastal) condenser, since the outdoor unit sits in the same salt air that eats central condenser coils.
Last updated June 19, 2026
Estimated ranges for Florida. Actual cost varies with home size, equipment, and scope — always request a written quote for your job.
| Service | Typical range |
|---|---|
| Ducted air-source heat pump + air handler, full system (installed) | $8,000–$16,000 |
| Premium variable-speed / inverter system (installed) | $15,000–$25,000 |
| Cold-climate (hyper-heat) premium (over standard air-source) | $1,500–$4,000 |
| Air handler replacement (paired with heat pump) | $1,500–$3,500 |
| Ductwork modification (resize / re-balance per Manual D) | $600–$2,200 |
| Geothermal (ground-source) system — premium alternative (installed) | $15,000–$35,000 |
| Geothermal loop field — drilling/trenching (per ft installed) | $10–$35 |
See broader context: Heat Pump Installation pricing nationwide